BS EN 50341-2-7:2023

Overhead electrical lines exceeding AC 1 kV. National Normative Aspects (NNA) for FINLAND (based on EN 50341-1:2012) | Status: Current

1 Scope

1.1 General

(ncpt) FI.1 Application of the standard in Finland In Finland, the standard EN 50341‑1 (Part 1) can only be applied using this NNA (EN 50341‑2‑7) containing National Normative Aspects for Finland. The requirements of the standard are applied also for low voltage (below 1 kV AC) overhead lines. The requirements of the structural design are applicable also for DC overhead lines, where the electrical requirements are given in the Project Specification. This standard is applicable for new overhead lines only. (ncpt) FI.2 Application for existing overhead lines Overhead lines complying with the mechanical and electrical requirements of its original date of construction can be operated and maintained, if they do not cause obvious danger. The reparation and overhaul of lines can be done according to the previous requirements. Reparation means that a component which has been damaged is substituted with a similar new one. Overhaul means a wider improvement of the line for extending its lifetime. The basic structure remains same as before. This standard should be used for all modification works on existing lines. In the modification works, earlier norms and standards may also be used, if allowed by the valid Electrical Safety Act. In that case it shall especially be verified that changes in actions do not cause significant increase in the loads of the line. Modification work means e.g. relocation of some supports or an extension to a line by addition of a circuit or changing of the conductors to existing supports.