What is BS EN 50377-8-13 - Connector sets and interconnect components about?
BS EN 50377 is a series on connector sets and interconnect components to be used in optical fibre communication systems. The interconnecting component is a term used to describe a generic connection interface that connects a computer peripheral to a PC motherboard or main circuit board. BS EN 50377-8-13 contains the initial, start of life dimensional, optical, mechanical, and environmental performance requirements which a terminated and assembled Single-mode resilient alignment sleeve LSHPC simplex connector set (plug-adaptor-plug), adaptor and patch-cord must meet in order for it to be categorized as an EN standard product. Since different variants and grades of performance are permitted, product marking details are given in BS EN 50377-8-13.
Who is BS EN 50377-8-13 - Connector sets and interconnect components for?
BS EN 50377-8-13 on connector sets is useful for:
- Telecommunication equipment manufacturers
- Design engineers
- Quality control personnel
- Research and development facilities
Why should you use BS EN 50377-8-13 - Connector sets and interconnect components?
Connector sets and interconnects components are structures that connect two or more circuit elements (such as transistors) together electrically. The design and layout of interconnects on an IC are vital to its proper function, performance, power efficiency, reliability, and fabrication yield. BS EN 50377-8-13 specifies the LSH-PC connector that is a single position plug connector set of plug-adaptor-plug configurations characterized by a cylindrical, spring-loaded butting ferrule of 2,5 mm nominal diameter and a latched push-pull coupling mechanism. The optical alignment mechanism of the connectors is of a resilient sleeve style. BS EN 50377-8-13 specifically defines the LSH-PC connector by its Plug type, Adaptor used, Materials used, Dimensions of the connector and colour and marking of the connector.
BS EN 50377-8-13 also described the dimensional requirements of the connector along with its test procedures needed for the termination on IEC 60793-2-50 category B1.1 and B1.3 single-mode fibre with titanium composite ferrule for category U. Using 50377-8-13 you can understand the initial, start of life dimensional, optical, mechanical, and environmental performance requirements which a terminated and assembled Single-mode resilient alignment sleeve LSHPC simplex connector set.
