What is BS EN 55016-1-3 - Specification for radio disturbance and immunity measuring apparatus and methods about?
BS EN 55016 is a series on specifications for radio disturbance and immunity measuring apparatus and methods. Noise immunity increases the amount of energy required before the radio defers, by making the radio less sensitive to weaker signals. BS EN 55016-1-3 specifies the characteristics and calibration of the absorbing clamp for the measurement of radio disturbance power in the frequency range 30 MHz to 1 GHz.
Who is BS EN 55016-1-3 - Specification for radio disturbance and immunity measuring apparatus and methods for?
BS EN 55016-1-3 on radio disturbance and immunity measuring apparatus and methods is useful for:
- Radio manufacturers
- Telecommunication equipment manufacturers
- Design engineers
- Research and development facilities
- Test laboratories
- Quality control personnel
Why should you use BS EN 55016-1-3 - Specification for radio disturbance and immunity measuring apparatus and methods?
The measurement of disturbance power using an absorbing clamp is a method for the determination of the radiated disturbance in the frequency range above 30 MHz This measurement method as described in BS EN 55016-1-3 represents an alternative approach to the measurement of the disturbance field strength on an OATS. The absorbing clamp measurement method (ACMM) is described in BS EN 55016-1-3.
The measurement instrumentation used by ACMM is the absorbing clamp assembly, the secondary absorbing device, and the absorbing clamp test site. BS EN 55016-1-3 gives an overview of the absorbing clamp measurement method including the instrumentation required for this method and the calibration and validation methods for the instrumentation. The requirements for the instrumentation necessary for the A CMM are specified in BS EN 55016-1-3. Using BS EN 55016-1-3 you can specify the characteristics and calibration of the absorbing clamp.
