Electrical apparatus for explosive gas atmospheres - Part 15 Type of protection “n”
Long abstractThis European Standard specifies requirements for the construction, testing and marking for Group II electrical apparatus with type of protection “n”, intended for use only in areas where explosive atmospheres of gas, vapour and mist are unlikely to occur or if they do occur, are likely to do so infrequently or for a short period only.
This standard is applicable to non-sparking electrical apparatus and also to apparatus with parts or circuits producing arcs or sparks or having hot surfaces which, if not protected in one of the ways specified in this standard, could be capable of igniting a surrounding explosive atmosphere.
This standard is also applicable to electrical equipment and components of Group II, Category 3G.
Short abstractRequirements for construction, testing and marking of electrical apparatus with type of protection “n”.
History and related standardsThis European Standard supersedes BS EN 50021:1999 which is withdrawn. It also partially supersedes DD ENV 50269:1997 which is also withdrawn.
This standard includes the following cross references:
IEC 60034 (all parts), IEC 60034-1:1996, IEC 60034-5, IEC 60050-411, IEC 60050(426), IEC 60050(486), IEC 60060 (all parts), IEC 60061 (all parts), IEC 60068-2-27:1987, IEC 60079-0:1998, IEC 60079-2, IEC 60079-11, IEC 60081, IEC 60112, IEC 60155, IEC 60216-1:1990, IEC 60216-2, IEC 60238:1998, IEC 60269-3, IEC 60400, IEC 60529:1989, IEC 60598-1:1996, IEC 60598-2 (all parts), IEC 60662:1992, IEC 60664-1, IEC 60920, IEC 60922, IEC 60924, IEC 60926: 1995, IEC 60927, 1996, IEC 60928: 1995, IEC 60998-2-4: 1991, IEC 61048, IEC 61049, IEC 61184.
BS EN 60079-15:2005 applies to non-sparking electrical apparatus and also to electrical apparatus with parts or circuits producing arcs or sparks or having hot surfaces which, if not protected in one of the ways specified in this standard, could be capable of igniting a surrounding explosive gas atmosphere.
This European standard describes several different methods by which this can be achieved which may be combined with other methods described in IEC 60079-0.
