What is BS EN 60544-2- Effects of ionizing radiation on insulators about?
BS EN 60544-2 is a European Standard. BS EN 60544-2 is part of IEC 60544. BS EN 60544-2 specifies the controls maintained over the exposure conditions during and after the irradiation of insulating materials with ionizing radiation prior to the determination of radiation-induced changes in physical or chemical properties. BS EN 60544-2 describes procedures for irradiation and test.
The objective of BS EN 60544-2 is to emphasize the importance of selecting suitable specimens, exposure conditions and test methods for determining the effect of radiation on appropriately chosen properties. Since many materials are used either in air or in inert environments, standard exposure conditions are recommended for both of these situations.
BS EN 60544 specifies a number of potentially significant irradiation conditions as well as various parameters which can influence the radiation-induced reactions under these conditions.
Note: BS EN 60544 does not consider measurements which are performed during the irradiation.
Who is BS EN 60544-2- Effects of ionizing radiation on insulators for?
BS EN 60544-2 on effects of ionizing radiation on insulators is useful for:
- Nuclear Power Plants
- Electrical engineer
- Manufacturer of winding wire
- Manufacturer of heavy electrical equipment
- Manufacturer of electrical appliances
- Hospitals
Why should you use BS EN 60544-2- Effects of ionizing radiation on insulators?
The effect of radiation can alter the properties of insulating material to a high degree depending on whether the product is being used in air or inert conditions. This may either cause accidents or misfunctioning of the equipment. Using BS EN 60544-2 guidelines which comprises of tests and requirements for the electrical insulating material condition can help in selection of right material.
In certain applications such as nuclear reactors and other scientific experiments where high radiation is expected, if material is not chosen and inspected properly can cause huge losses. BS EN 60544-2 guidelines are helpful in creating a safer environment for users.
