What is BS EN 6056 - Rod-end with bearing about ?
BS EN 6056 is a European standard on aerospace series which covers rod-end with bearing per EN 4614.
BS EN 6056 specifies the characteristics of adjustable rod-ends consisting of:
- A self-aligning ball bearing with self-lubricating liner (EN 4614).
- A rod-end with threaded shank with an optional longitudinal groove for locking purposes.
Note: BS EN 6056 is published at edition P2. Former P1 and drafts may exist of Airbus development only but without any ASD-STAN official publication. In consequence configuration management discrepancies with these unofficial documents are under Airbus responsibility.
Who is BS EN 6056 - Rod-end with bearing for ?
BS EN 6056 on rod-ends consisting of self-aligning ball bearing is applicable to:
- Aerospace parts manufacturers    
- Self-aligning ball bearing manufacturers 
- Dimensions and loads engineers   
Why should you use BS EN 6056 - Rod-end with bearing ?
A rod end bearing is a common type of mechanical joint used on the ends of control rods. The steering columns in most cars, trucks and other vehicles, for example, feature tie rods with a rod end bearing. Of course, tie rods are designed to connect a vehicle's steering rack to its steering knuckle.
Adjustable rod-ends consisting of self-aligning ball bearing with self-lubricating liner are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms, which is vital for aeroplane passengers' safety. BS EN 6056 on aerospace series of adjustable rod-ends consisting of self-aligning ball bearing with self-lubricating liner provides best practices for the same.  
BS EN 6056 gives all the details on the requirements of adjustable rod-ends consisting of self-aligning ball bearing with self-lubricating liner which will give you a solid base to start with and reduce the risk of safety for the aerospace industry.  
BS EN 6056 concludes with a quality management system section which makes sure that all the practices that are implemented are able to maintain the necessary quality standards, which gives you an assurance of safety.
