What is BS EN 60684-3-121 to 124 - Specification for extruded silicon sleeving about?
BS EN 60684-3-121 to 124 of IEC 60684-3 give the requirements for four types of non-heat shrinkable sleeving, extruded from silicone elastomer.
These sleevings as outlined in BS EN 60684-3-121 to 124 are normally available with internal diameter up to 25 mm and in a range of wall thicknesses between 0,1 mm and 2,0 mm.
Sleevings mentioned in BS EN 60684-3-121 to 124 are normally available in the following opaque colours: black, brown, red, orange, yellow, green, blue, violet, grey, white and pink. They are also available in a translucent form.
Sizes or colours other than those specifically listed in BS EN 60684-3-121 to 124 may be available as custom items. These items shall be considered to comply with BS EN 60684-3-121 to 124 if they comply with the other property requirements listed in BS EN 60684-3-121 to 124.
Who is BS EN 60684-3-121 to 124 - Specification for extruded silicon sleeving for?
BS EN 60684-3-121 to 124 on specification for extruded silicon sleeving is useful for:
- Electrical engineer
- Quality inspectors
- Manufacturers of sleevings
- Manufacturers of electrical wires and cables
- Manufacturer of heavy electrical equipment
- Manufacturer of electrical appliances
- Power Distribution companies
Why should you use BS EN 60684-3-121 to 124 - Specification for extruded silicon sleeving?
Sleeving is used to provide safety from electric shocks at the joints.
BS EN 60684-3-121 to 124 provides specifications for extruded silicon sleeving.
Manufacturers using BS EN 60684-3-121 to 124 can benefit from applying the specifications to choose better components and manufacture high quality sleevings. This further ensures safety in all kinds of appliances and electronic products.
