BS EN 60793-2:2008 Optical fibres. Product specifications. General
BS EN 60793-2 contains the general specifications for both multimode and singlemode optical fibres.
Sectional specifications for each of the four multimode categories: A1, A2, A3, and A4 contain requirements specific to each category. A sectional specification for all single-mode categories contains requirements common to all single-mode fibres. Within each sectional specification, family specifications – found as normative annexes – contain requirements for the applicable sub categories. These sub-categories are distinguished on the basis of different fibre types or applications.
The requirements of BS EN 60793-2 apply to all categories. Each sectional specification contains the requirements that are common to all the family specifications that are within it. These common requirements are copied to the family specification for ease of reference.
Tests or measurement methods are defined for each specified attribute. Where possible, these definitions are by reference to an IEC standard – otherwise the test or measurement method is outlined in the relevant sectional specification.
Contents of BS EN 60793-2:
• Scope
• Normative references
• Terms and definitions
• Quality assurance
• Construction of optical fibres
• Category A – Multimode fibres
• Category B – Single-mode fibres
• Category C – Single-mode fibres for intraconnection
• General requirements
• Coating
• Buffer
• Colours of the coating and/or buffer
• Sectional specifications
• Categories of multimode fibres
• Categories of glass core/glass clad single-mode fibres
• Categories of glasscor/glass clad single mode fibres for intraconnection
