BS EN 60794-1-2:2017

Optical fibre cables. Generic specification. Basic optical cable test procedures. General guidance | Status: Superseded, Withdrawn

1 Scope This part of IEC 60794‑1 applies to optical fibre cables for use with telecommunications equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. The prime objective of this document is to provide the end user with an overview about the content of different parts of the IEC 60794‑1 series numbered -2X. Table 1 shows the different parts. Table 1 — Document overview Test methods IEC reference General guidance IEC 60794‑1‑2 Methods E – Mechanical IEC 60794‑1‑21 Methods F – Environmental IEC 60794‑1‑22 Methods G – Cable elements IEC 60794‑1‑23 Methods H – Electrical IEC 60794‑1‑24

NOTE Several numbers in the test method numbering sequence are missing. The reasons for these omissions are historical. To avoid confusion, the existing numbering sequence has been retained.

These documents define test procedures to be used in establishing uniform requirements for the geometrical, transmission, material, mechanical, ageing (environmental exposure) and climatic properties of optical fibre cables, and electrical requirements where appropriate. Throughout the documents, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. The secondary objective of this document is to provide the end user with useful guidance when testing optical fibre cables.