What is BS EN 6098 - Rod-end with bearing about?
BS EN 6098 is a European standard on aerospace series which covers rod-end with bearing per EN 6097 in corrosion resisting steel.
BS EN 6098 specifies the characteristics of adjustable rod ends consisting of:
- A spherical plain bearing, metal to metal, in corrosion resisting steel, extra wide series.
- A rod–end with threaded shank with an optional longitudinal groove for locking purposes.
Note: BS EN 6098 is published at edition P2. Former P1 and drafts may exist of Airbus development only but without any ASD-STAN official publication. In consequence configuration management discrepancies with these unofficial documents are under Airbus responsibility.
Who is BS EN 6098 - Rod-end with bearing for?
BS EN 6098 on adjustable rod ends in corrosion resisting steel is applicable to:
- Aerospace parts manufacturers 
- Adjustable rod end manufacturers
- Dimensions and loads engineers
Why should you use BS EN 6098 - Rod-end with bearing?
A rod end bearing is a common type of mechanical joint used on the ends of control rods. The steering columns in most cars, trucks and other vehicles, for example, feature tie rods with a rod end bearing. Of course, tie rods are designed to connect a vehicle's steering rack to its steering knuckle.
Adjustable rod ends are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms, which is vital for aeroplane passengers safety. BS EN 6098 on aerospace series of adjustable rod ends in corrosion resisting steel provides best practices for the same.
BS EN 6098 gives all the details on the requirements of adjustable rod ends in corrosion resisting steel which gives a solid base for the user to start with and reduces the risk of safety for the aerospace industry.
