What is this BS EN 61041-5 - Non-broadcast video tape recorders about?
BS EN 61041-5 discusses methods of measurement non-broadcast video tape recorders with a focus on high-band video tape recorders, including those equipped with Y/C video connectors. BS EN 61041-5 is the fifth part of the BS EN 61041 multi-series on methods of measurement non-broadcast video tape recorders that specifies the general requirements for methods of measurement for high-band video tape recorders, including those equipped with Y/C video connector(s) (NTSC/PAL).
BS EN 61041-5 is applicable both to machines using normal input/output connectors for the measurement of the composite video signal, and to machines using the Y/C video connectors (herein after referred to as S video connectors) for the measurement of the Y/C separated video signal.
BS EN 61041-5 is applicable when characteristics of the video and audio signals recorded and reproduced using high-band videotape recorders are to be checked and measured. The object of BS EN 61041-5 is to describe the methods of measurement for non-broadcast video tape recorders.
Who is BS EN 61041-5 - Non-broadcast video tape recorders for?
BS EN 61041-5 on non-broadcast video tape recorders is useful for:
- Video equipment manufactures
- High-band video tape recorders mamnufacturers
- Non-broadcast videotape recorders manufacturers
- Non-broadcast videotape recorders test personnel
- Sound technicians
Why should you use BS EN 61041-5 - Non-broadcast video tape recorders?
The video tape recorders on the market today have a very good record and playback compatibility provided that the level of the test signals and the frequencies of the carriers to be recorded are set precisely within specifications.
BS EN 61041-5 is to be referred to particularly when characteristics of the video and audio signals recorded and reproduced using high-band videotape recorders are to be checked and measured. The luminance signal separation is the ratio of the chrominance signal that remains in the separated luminance signal with respect to the reference level of the video signal output at the S video connector and is measured by applying the composite video signal to the normal video input connector.
The methods provided by BS EN 61041-5 assist you in improving the performance and quality of the non-broadcast videotape recorders.
With obedience and compliance to BS EN 61041-5, you can enhance non-broadcast videotape recorders’ effectiveness and efficacy and manufacture a standardized product.
