What is BS EN 61108-4- Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment about?
BS EN 61108 discusses marine navigation and radiocommunication equipment, systems and global navigation satellite systems (GNSS).
BS EN 61108-4 is the fourth part of BS EN 61108 multi-series and discusses performance requirements, methods of testing and required test results of shipborne DGPS and DGLONASS maritime radio beacon receiver equipment.
BS EN 61108-4 may be satisfied by equipment integral with GNSS equipment. BS EN 61108-4 is applicable to HSC. BS EN 61108-4 covers the basic requirements of maritime radio beacon receiver equipment providing augmentation information to Position-fixing equipment, including health messages.
Who is BS EN 61108-4- Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment for?
BS EN 61108-4 on shipborne DGPS and DGLONASS maritime radio beacon receiver equipment is useful for:
- Ship manufacturers
- Shipowners
- Shipborne radar and GPS manufacturers
- Marine equipment manufacturers
- Quality control personnel
- Inspection personnel
Why should you use BS EN 61108-4- Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment?
Differential services broadcast information for augmenting Global Positioning System (GPS) and the Global Navigation Satellite System (GLONASS) to provide the accuracy and integrity required for entrances and harbour approaches and other waters in which the freedom to manoeuvre is limited. Various service providers are broadcasting differential information applicable to localised areas.
BS EN 61108-4 provides you with the minimum operational and performance requirements, methods of testing and required test results conforming to performance standards not inferior to those adopted by the IMO in resolution MSC.114(73). In addition, it takes account of IMO resolution A.694(17) and is associated with IEC 60945. BS EN 61108-4 helps you to provide high-quality shipborne DGPS and DGLONASS maritime radio beacon receiver equipment.
