BS EN 61169-16:2007

What is BS EN 61169-16 - RF coaxial connectors sectional specification about?

BS EN 61169-16 is the 16th part of the multiple series document that provides information and rules for the preparation of Detail Specifications (DS) for pin and socket R.F. coaxial connectors, with screw coupling mechanisms, for low to medium power applications. The connector is commonly known as the "type N".

Who is BS EN 61169-16 - RF coaxial connectors sectional specification for?

BS EN 61169-16 on radio-frequency connectors is useful for: 

• RF power amplifiers 
• RF isolator 
• Microwave systems
• Mobile telephone antennas
• Domestic sectors 
• Sectors with satellite installations 
• Radio stations 
• Radio communication companies 

Why should you use BS EN 61169-16 - RF coaxial connectors sectional specification?

BS EN 61169-16 specifies three versions of the 50 Ω characteristic impedance type N connector is included, each version being mate able with each of the others.

• The general-purpose connector (grade 2) derived from the specifications MIL-C17B and MIL-C-39012 may preferably be used with R.F. cable 60096 IEC 50-7 up to about 12 GHz maximum frequency
• The high-performance connector (grade 1) is particularly suitable for microwave applications when lower reflection factors than are offered by the general-purpose connector are required. The connectors may also be suitable for microwave components. The tolerances of the interface dimensions lie between those for grade 0 and grade 2 and are chosen to give the performance required. Some grade 1 connectors conforming to this specification may be used up to 18 GHz maximum frequency
• The standard test connector (grade 0) has a closely controlled interface to provide a reference for the measurement of connectors, cable assemblies, components, and equipment with the above two interfaces. It may also be used as a microwave connector in situations when the most precise interface for use up to 18 GHz maximum frequency is required

Overall, BS EN 61169-16 specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements.