What is BS EN 61180-Low-voltage equipment testing about?
BS EN 61180 is a European Standard that is applicable to:
- Dielectric tests with direct voltage
- Dielectric tests with alternating voltage
- Dielectric tests with impulse voltage
- Test equipment used for dielectric tests on low-voltage equipment
BS EN 61180 is applicable only to tests on equipment having a rated voltage of not more than 1 kV a.c. or 1,5 kV d.c.
BS EN 61180 is applicable to type and routine tests for objects which are subjected to high voltage tests as specified by the technical committee.
The test equipment comprises a voltage generator and a measuring system. BS EN 61180 covers test equipment in which the measuring system is protected against external interference and coupling by appropriate screening, for example, a continuous conducting shield. Therefore, simple comparison tests are sufficient to ensure valid results.
BS EN 61180 is not intended to be used for electromagnetic compatibility tests on electric or electronic equipment
Note: Tests with the combination of impulse voltages and currents are covered by IEC 61000-4-5.
Who is BS EN 61180-Low-voltage equipment testing for?
BS EN 61180 on low-voltage equipment is useful for:
- Electrical and electronic industry
- Mechanical industry
- Low-voltage equipment manufacturers
- Technical committees
Why should you use BS EN 61180-Low-voltage equipment testing?
Low voltage systems are comprised of electrical equipment that uses 50 volts (V) of electricity or less. Common low voltages include 48 V, 24 V, and 12 V.
BS EN 61180 provides you with:
- Defined terms of both general and specific applicability
- General requirements regarding test objects and test procedures
- Methods for generation and measurement of test voltages
- Test procedures
- Methods for the evaluation of test results and to indicate criteria for acceptance
- Requirements concerning approved measuring devices and checking methods
- Measurement uncertainty
Compliance with the best industry methods on high-voltage test techniques for low-voltage equipment with BS EN 61180 can help improve the efficiency and performance of the low-voltage equipment.
