What is BS EN 61249-2-36 - Epoxide woven E-glass laminate sheets used in printed boards about?
BS EN 61249-2-36 is the second part of a multi-series standard used for printed boards and other interconnecting structures that specifies the properties of clad and unclad materials.
By using BS EN 61249-2-36 you can manufacture good quality printed boards and other interconnecting structures.
BS EN 61249-2-36 gives requirements for properties of di-functional brominated epoxide
woven E-glass laminate sheet 0,05 mm up to 3,2 mm of defined flammability (vertical burning
test), copper-clad. The glass transition temperature is defined to be 120 °C minimum.
Its flame resistance is defined in terms of the flammability requirements of 7.3.
Some property requirements may have several classes of performance. The class desired
should be specified on the purchase order otherwise the default class of material will be
supplied.
Who is BS EN 61249-2-36 - Epoxide woven E-glass laminate sheets used in printed boards for?
BS EN 61249-2-36 on Epoxide woven E-glass laminate sheets used in printed boards is useful for:
- Aerospace
- Manufacturer of aircrafts
- Manufacturer of electronic components
- Manufacturer of automotive parts
- Electronic engineer
Why should you use BS EN 61249-2-36 - Epoxide woven E-glass laminate sheets used in printed boards?
Printed circuit boards (PCBs) are used to mechanically support and electrically connect electronic components. These components are connected by using conductive pathways, tracks or signal traces etched from copper sheets laminated onto a non-conductive substrate.
BS EN 61249-2-36 specifies the materials that can be used in constructing these printed circuit boards according to their operational requirements. This helps in determining the electrical properties of clad and unclad materials used in printed boards. With the help of these non-electric properties of the copper-clad laminate, you can avoid the defects that directly impact the materials which are to be used in the manufacturing process.
By applying BS EN 61249-2-36, you can ensure the sustainability of these printed boards in different climatic conditions. This helps in manufacturing good quality Epoxide woven E-glass laminate sheets used in printed boards.
