What is BS EN 61274-1-1 - Fibre optic interconnecting devices and passive components about?
BS EN 61274 is a series on fibre optic interconnecting devices and passive components. Fibre optic interconnecting devices and passive components do not require electrical-to-optical or optical-to-electrical conversion during their operation. BS EN 61274-1-1 is part of the generic specification IEC 61274-1, Fibre optic interconnecting devices and passive components- Adaptors for fibre optic connectors-Part 1; Generic specification. BS EN 61274-1-1 includes:
- A blank worksheet with instructions for preparing detailed specifications.
Who is BS EN 61274-1-1 - Fibre optic interconnecting devices and passive components for?
BS EN 61274-1-1 on fibre optic interconnecting devices and passive components is useful for:
- Telecommunication component manufacturers
- Telecommunication equipment manufacturers
- Design engineers
- Quality control personnel
Why should you use BS EN 61274-1-1 - Fibre optic interconnecting devices and passive components?
Fibre optic interconnecting devices and passive components are widely used by people as a promising solution for modern access to telecommunication networks. BS EN 61274-1-1 states the qualification approval procedure to be used either the fixed sample or the lot-by-lot and a periodic procedure may be used. The mandatory test schedules for qualification by the fixed sample procedure are defined in BS EN 61274-1-1 of the detailed specification worksheet.
The fixed sample procedure consists in subjecting a sample of specimens to the fixed sample qualification test sequence as specified in BS EN 61274-1-1. The sample is drawn from current production. The requirements for independent measurements (measurements that are not part of an environmental test) are either specified as a note to the table where it was added (Tables 1, 2 or 3) or included in BS EN 61274-1-1 under the appropriate measurement. The requirements for dependent measurements (measurements that are part of an environmental test) are specified under the environmental test in BS EN 61274-1-1. Using BS EN 61274-1-1 you can specify adaptors for fibre optic connectors.
