What is BS EN 61753-087-2 - fibre optic interconnecting devices and passive components about?
BS EN 61753 is a series on fibre optic interconnecting devices and passive components. Fibre optic interconnecting devices and passive components do not require electrical-to-optical or optical-to-electrical conversion during their operation. BS EN 61753-087-2 contains the minimum initial performance, test and measurement requirements and severities that a fibre optic pigtailed 1 310 nm upstream and 1 490 nm downstream wide wavelength division multiplexing (WWDM) passive optical network (PON) device must satisfy in order to be categorized as meeting the requirements of category C (controlled environments).
Who is BS EN 61753-087-2 - fibre optic interconnecting devices and passive components for?
BS EN 61753-087-2 on fibre optic interconnecting devices and passive components is useful for:
- Telecommunication component manufacturers
- Telecommunication equipment manufacturers
- Design engineers
- Quality control personnel
Why should you use BS EN 61753-087-2 - fibre optic interconnecting devices and passive components?
Fibre optic interconnecting devices and passive components are used by people as a promising solution for modern access to telecommunication networks. BS EN 61753-087-2 provides information concerning the function of the 1 310 nm upstream and 1 490 nm downstream WWDM.
BS EN 61753-087-2 describes the 1 310 nm upstream and 1 490 nm downstream PON WWDM devices are used inside the PON for facilitating the transport of downstream traffic from the central office (CO) optical line terminal (OLT) with the upstream signal from the optical network unit (ONU) installed at the premises. They also can be used to combine and separate the downstream and upstream traffic at the customer ONU. Using BS EN 61753-087-2 you can specify the minimum initial performance, test and measurement requirements and severities that a fibre optic pigtailed 1 310 nm upstream and 1 490 nm downstream wide wavelength division multiplexing.
