What is BS EN 61753-2-3 - Fibre optic interconnecting devices and passive components about?
BS EN 61753-2-3 is the second part of a multi-series standard used for Fibre optic interconnecting devices and passive components.
BS EN 61753-2-3 contains the minimum initialisation test and measurement requirements and severities which a branching device shall satisfy in order to be categorised as meeting the IEC standard. The requirements cover balanced non-connectorised single-mode 1×N and 2×N non-wavelength-selective branching devices for use in an IEC Category U environment (N is the number of output ports). The specifications of unbalanced branching devices are limited to 1×2 and 2×2 devices because they are the most commonly used.
Who is BS EN 61753-2-3 - Fibre optic interconnecting devices and passive components for?
BS EN 61753-2-3 on Fibre optic interconnecting devices and passive components is useful for:
- Manufacturer of electronic components
- Telecommunication industries
- Defence
- Aerospace
- Electronic engineer
Why should you use BS EN 61753-2-3 - Fibre optic interconnecting devices and passive components?
Fibre optics is the technology used in transmitting information through strands of fibre. This strand of fibre is made up of glass or plastic for long distances. The passive component is an electronic component that can only receive energy. This energy can be absorbed or stored in an electric field or a magnetic field.
BS EN 61753-2-3 specifies the test method and test procedure for Non-connectorised single-mode 1xN and 2xN non-wavelength-selective branching devices. This test method helps in determining and evaluating the performances of these devices. BS EN 61753-2-3 specifies the performance requirements to be used according to their operational requirements. By applying BS EN 61753-2-3, you can manufacture good quality fibre optic interconnecting devices and passive components.
