What is BS EN 61753-382-2 - G-PON-NGA WWDM devices for category C about?
BS EN 61753 is a European standard on the performance standard for fibre optic interconnecting devices and passive components. BS EN 61753-382-2 provides for non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C to enhance their performance.
BS EN 61753-382-2 is the second subpart of the three hundred eighty-second part of a multi- part series that contains the minimum initial performance, test, and measurement requirements and severities which a fibre optic pigtailed wide wavelength division multiplexing (WWDM) device for combining and splitting gigabit-capable passive optical networks (G-PON) up/down signals and next-generation access (NGA) bands.
BS EN 61753-382-2 provides information concerning the principle and function of the WWDM.
Who is BS EN 61753-382-2 - G-PON-NGA WWDM devices for category C for?
BS EN 61753-382-2 on non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C is relevant to:
- Fibre optic interconnecting devices and passive components manufacturers
- G-PON-NGA WWDM device manufacturers
- Measuring apparatus and testing equipment manufacturers
- Testing authorities
Why should you use BS EN 61753-382-2 - G-PON-NGA WWDM devices for category C?
WDM filter is located in the central office to combine/isolate the wavelengths of GPON and NGA signals and combine the video signals.
BS EN 61753-382-2 provides you with minimum initial performance, test, and measurement requirements and severities.
This assists in evaluating the performance of G-PON-NGA WWDM devices for category C to satisfy the conditions and requirements of category C (controlled environment). Each test described in BS EN 61753-382-2 defines the number of samples to be evaluated. The samples used for each test are intended to be previously unstressed new samples but may also be selected from previously used samples if desired. Unless otherwise stated, all measurements shall be carried out at standard atmosphere conditions defined in IEC 61300-1.
Overall, BS EN 61753-382-2 assists you in enhancing the performance of non-connectorized single-mode bidirectional G-PON-NGA WWDM devices for category C.
