What is BS EN 61788-3- DC critical current of Superconductor about?   
BS EN 61788 discusses superconductivity. BS EN 61788-3 is the third part of BS EN 61788 multi-series and discusses the DC critical current of Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors.
BS EN 61788-3 is a part of IEC 61788 that covers a test method for the determination of the dc critical current of short and straight Ag- and/or Ag alloy-sheathed Bi-2212 and Bi-2223 oxide superconductors that have a monolithic structure and a shape of round wire or flat or square tape containing mono- or multicores of oxides.
Who is BS EN 61788-3- DC critical current of Superconductor for?  
BS EN 61788-3-DC critical current of Superconductor is useful for:  
- Railguns Manufacturer  
- Coilguns Manufacturer  
- Circuits Manufacturer  
- Detectors Manufacturer 
- Magnetic resonance imaging manufacturer
Why should you use BS EN 61788-3- DC critical current of Superconductor?   
The critical current of composite superconductors like Ag-sheathed Bi-oxide superconductors depends on many variables. These variables need to be considered in both the testing and the application of these materials.
Test conditions such as magnetic field, temperature and relative orientation of the specimen and magnetic field are determined by the application. The test configuration may be determined by the conductor through certain tolerances.
The specific critical current criterion may be determined by the application. It may be appropriate to measure several test specimens if there are irregularities in the testing. The test method covered in BS EN 61788-3 is intended to give an appropriate and agreeable technical base to those engineers working in the field of superconductivity technology.
