What is this BS EN 61834-10 - Helical-scan digital video cassette recording system about?
BS EN 61834-10 discusses recording and helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) with a focus on DTV format. BS EN 61834-10 is the 10th part of the multi series on recording that specifies the content, format and recording method for the data blocks forming the helical records on the tape containing audio, video and system data.
BS EN 61834-10 describes the specifications for the recording of single DTV programmes. The DTV data is delivered to the digital video cassette recorder via a digital interface or by a built-in tuner (IRD). The DTV data consists of an MPEG2 transport stream containing one or more programmes.
Who is BS EN 61834-10 - Helical-scan digital video cassette recording system for?
BS EN 61834-10 on helical-scan digital video cassette recording system is useful for:
- Audio equipment manufactures
- Audio programmers
- Music producers
- Sound technicians
- Recording and dubbing studios
- Regulatory bodies
Why should you use BS EN 61834-10 - Helical-scan digital video cassette recording system?
In DTV, video signal coding is based on MPEG2. One programme may consist of one video bit stream or several audio bit streams and data bit streams. Due to the varied bit rates of single DTV programmes, several recording modes are specified in order to make efficient use of the storage capacity of the digital video cassette recorder. In addition to the normal play data stream of DTV recording, one or two special trick play data streams may optionally be generated and recorded in the video area.
BS EN 61834-10, the data structure of a track is defined by APT = 000b which consists of four areas as described of IEC 61834-1 and AP1 = AP3 = 000b. The data structure of MIC is the same as of IEC 61834-2.
