What is this BS EN 61834-9 - Helical-scan digital video cassette recording system about?
BS EN 61834-9 discusses recording and helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60, and 1250-50 systems) with a focus on DVB format.
BS EN 61834-9 is the ninth part of the multi series on that specifies the content, format, and recording method for the data blocks forming the helical records on the tape containing audio, video and system data. In DVB, the MPEG2 MP@ML is specified to encode the video signal. The maximum bit rate for the video signal is 15 Mbps. One programme may consist of one video bit stream or several audio bit streams and data bit streams.
Who is BS EN 61834-9 - Helical-scan digital video cassette recording system for?
BS EN 61834-9 on helical-scan digital video cassette recording system is useful for:
- Audio equipment manufactures
- Audio programmers
- Music producers
- Sound technicians
- Recording and dubbing studios
- Regulatory bodies
Why should you use BS EN 61834-9 - Helical-scan digital video cassette recording system?
Due to the varied bit rates of single DVB programmes, several recording modes are specified in order to make efficient use of the storage capacity of the digital video cassette recorder. In addition to the normal play data stream of DVB recording, one or two special trick play data streams may optionally be generated and recorded in the video area.
BS EN 61834-9 part describes the specifications for the recording of single DVB programmes. The DVB data is delivered to the digital video cassette recorder via a digital interface or by a built-in tuner (IRD). The DVB data consist of an MPEG2 transport stream containing one or more programmes. In BS EN 61834-9, the data structure of a track is defined by APT = 000b which consists of four areas as described in IEC 61834-1 and AP1 = AP3 = 000b. The data structure of MIC is the same as in IEC 61834-2.
