What is BS EN 61869-4 ‒ Additional requirements for combined transformers about ?
BS EN 61869-4 is the fourth part of an international multi-series standard that covers general specifications for instrument transformers.
BS EN 61869-4 applies to newly-manufactured combined transformers for use with electrical measuring instruments and electrical protective devices at frequencies from 15 Hz to 100 Hz.
BS EN 61869-4 gives the requirements and tests that can cover current and inductive voltage transformers that are necessary for combined instrument transformers, in addition to the requirements and tests of IEC 61869-1, IEC 61869-2, and IEC 61869-3.
BS EN 61869-4 stipulates the technicalities such as related terms, definitions, and abbreviations, normal and special service conditions, ratings, design and construction, general tests, rules for transport, storage, erection, operation, maintenance, safety, and influence on the natural environment.
Who is BS EN 61869-4 ‒ Additional requirements for combined transformers for ?
BS EN 61869-4 on additional requirements for combined transformers is useful for:
- Manufacturers and suppliers of instrument transformers
- Dealers and distributors of instrument transformers
- Designers and developers of instrument transformers
- Test/ service providers for instrument transformers
Why should you use BS EN 61869-4 ‒ Additional requirements for combined transformers ?
A combined instrument transformer is an instrument transformer consisting of a current and a voltage transformer in the same enclosure. The instrument transformers are widely used for operating the instruments or for metering from high voltage or high current circuits, to safely isolate the secondary control circuitry from the high voltages or currents.
BS EN 61869-4 demonstrates the technical specifications for the designing and construction of the combined instrument transformer, that is in compliance with the global standards. This helps the users to manufacture good quality combined transformer.
BS EN 61869-4 gives you the tests methods to verify the performance characteristics of the combined instrument transformers, under normal and special operating conditions. It lays out provisions for the transportation and storage of these transformers as well as informs the rules for erection and maintenance of combined instrument transformers.
BS EN 61869-4 considers the safety aspect of the instrument combines transformers and stipulates the requirements for the transformers, in order to limit any sorts of errors and reduce the risks. These requirements could also correspond to the requirements for measuring current transformers, and for measuring voltage transformers.
