What is BS EN 62343-4-1 - 1 x 9 wavelength selective switch for software and hardware interface about ?
BS EN 62343 is a European standard that discusses dynamic modules. BS EN 62343-4-1 provides the best industry guidance on software and hardware interface — 1 x 9 wavelength selective switch to standardize their performance.
BS EN 62343-4-1 is the first subpart of the fourth part of a multi-part series that describes and provides specifications for a software and hardware interface for the 1 x 9 wavelength selective switch.
BS EN 62343-4-1 addresses the configuration and function to control a WSS. This interface is intended to enable a user or host to retrieve the switch status and/or adjust relevant switch and attenuation settings.
Who is BS EN 62343-4-1 - 1 x 9 wavelength selective switch for software and hardware interface for ?
BS EN 62343-4-1 on Software and hardware interface, 1 x 9 wavelength selective switch is useful for:
- Software and hardware interface engineers and developers
- Switch manufacturers
- Regulatory bodies
Why should you use BS EN 62343-4-1 - 1 x 9 wavelength selective switch for software and hardware interface ?
A wavelength selective switch (WSS) is a dynamic module, which is mainly used in a reconfigurable optical add-drop multiplexer (ROADM) system to switch all wavelength signals to their respective required output port in dense wavelengths division multiplexing (DWDM) networks.
BS EN 62343-4-1 guideline assists you with the basic configuration of WSS interface, software interface, hardware interface – electrical connector, hardware interface details, and DPRAM memory map details and timing charts for a 1 x 9 wavelength selective switch for Software and hardware interface.
With compliance and obedience to BS EN 62343-4-1, you can standardize the performance of 1 x 9 wavelength selective switch for software and hardware interface.
