BS EN 62384:2006+A1:2009 DC or AC supplied electronic control gear for LED modules. Performance requirements
BS EN 62384 specifies performance requirements for electronic control gear for use on d.c. supplies up to 250 V and a.c. supplies up to 1 000 V at 50 Hz or 60 Hz with an output frequency which can deviate from the supply frequency, associated with LED modules according to IEC 62031. Control gear for LED modules specified in this standard are designed to provide constant voltage or current. Deviations from the pure voltage and current types do not exclude the gear from this standard.
The tests in this standard are type tests. Requirements for testing individual control gear during production are not included.
Requirements for control gear which incorporate means for varying the output power are under consideration.
It may be expected that control gear complying with this standard will ensure satisfactory operation between 92 % and 106 % of the rated supply voltage, taking into account the specifications of the LED module manufacturer.
Contents of BS EN 62384:
Scope
Normative references
Terms and definitions
General notes on tests
Classification
Classification according to the load
Classification according to the output voltage
Classification according to the output current
Marking
Mandatory marking
Optional marking
Output voltage and current
Starting and connecting requirements
Voltage and current during operation
Capacitive load requirement
Voltage surges during switching and operation
Total circuit power
Circuit power factor
Supply current
Impedance at audio-frequencies
Operational tests for abnormal conditions
Endurance
