What is BS EN 62386‑302 - Digital addressable lighting about?
BS EN 62386‑302 is a European standard that discusses the requirements of input devices of absolute input devices for digital addressable lighting interface. It is a dedicated protocol for digital lighting control that enables the easy installation of robust, scalable and flexible lighting networks.
BS EN 62386‑302 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies.
NOTE: BS EN 62386‑302 is only applicable to IEC 62386-103:2014 and IEC 62386103:2014/AMD1 input devices that make the lighting control system sensitive to absolute input devices such as switches or sliders. An absolute input device always has a deterministic state, such as a position between start and endpoint.
Who is BS EN 62386‑302 – Digital addressable lighting for?
BS EN 62386‑302 on Digital addressable lighting applies to:
- Manufacturer of input devices
- Quality testing of devices
- Electronic engineer
Why should you use BS EN 62386‑302 – Digital addressable lighting?
Digital Addressable Lighting Interface is a dedicated protocol for digital lighting control that enables the easy installation of robust, scalable and flexible lighting networks. The input device is a piece of equipment used to provide data and control signals to an information processing system such as a computer or information appliance.
BS EN 62386‑302 provides guidance regarding the standardization of the control interface for control devices is intended to achieve compatible co-existence and multi-master operation between electronic control gear and lighting control devices, below the level of building management systems. BS EN 62386‑302 describes a method of implementing control devices.
BS EN 62386‑302 provides you with comprehensive information useful for absolute input devices for digital addressable lighting interface.
