What is BS EN 62386-304 - Digital addressable lighting about?
BS EN 62386-304 is a standard that discusses the requirements of input devices of Light sensors for digital addressable lighting interfaces. It is a dedicated protocol for digital lighting control that enables the easy installation of robust, scalable and flexible lighting networks.
BS EN 62386-304 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies. BS EN 62386-304 is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1 input devices that deliver illuminance level information to the lighting control system through light level sensing.
Who is BS EN 62386‑304 – Digital addressable lighting for?
BS EN 62386‑304 on Digital addressable lighting applies to:
- Manufacturer of light sensor devices
- Quality testing personnel
- Electronic engineer
Why should you use BS EN 62386‑304 – Digital addressable lighting?
Digital Addressable Lighting Interface is a dedicated protocol for digital lighting control that enables the easy installation of robust, scalable and flexible lighting networks. This system ensures areas are not too bright or too dark. As daylight levels change, the sensors automatically adjust the lights.
By using BS EN 62386‑304, you can avail the guidance for light sensors input devices. You can ensure the quality of the input devices, cause of the error detection in the input device.
If a physical sensor failure is detected, the instance is set “instance error” to TRUE, from the moment the failure is detected until the failure is resolved. While the error is detected, no further events are sent. With obedience and compliance to BS EN 62386‑303, you can achieve precision in terms of product functionality.
