What is BS EN 62490-2 - ESL measuring method for Surface mount capacitors about?
BS EN 62490-2 is the second part of the multi-series standard used for ESL measuring method. This helps in manufacturing good quality Surface mount capacitors for use in electronic equipment.
BS EN 62490-2 provides the ESL measuring method for the surface mount capacitors for use in electronic equipment. The ESL measurement method can be applied to the surface mount capacitors with the following properties, but not limited to these:
- Capacitance range: 10 μF to 1 000 μF
- Size: L × W = 3,2 mm × 1,6 mm to 7,3 mm × 4,3 mm, H = 4,0 mm
- ESL range: 5 nH or less
Note: The surface mount capacitors in this document are limited to capacitors with lead frame or with thin coated terminals, see Figure 1. The scope of this document does not include capacitors with face down terminals, see Figure 2.
Who is BS EN 62490-2 - ESL measuring method for Surface mount capacitors for?
BS EN 62490-2 on ESL measuring method for Surface mount capacitors is useful for:
- Manufacturer of electronic components
- Manufacturer of automotive parts
- Manufacturer of circuit boards
- Electronic components
Why should you use BS EN 62490-2 - ESL measuring method for Surface mount capacitors?
The capacitor is a device used in storing electrical energy. This capacitor consists of two conductors in close proximity and insulated from each other.
BS EN 62490-2 helps in determining the properties which are useful in performing the measuring method for surface mount capacitors. BS EN 62490-2 specifies the ESL measuring method and procedure for surface mount capacitors used in electronic components. This method is useful in measuring the inductance value that is ESL of these capacitors.
By applying BS EN 62490-2, you can ensure the sustainability of these capacitors in different climatic conditions. That helps in the manufacturing good quality surface mount capacitors used in electronic equipment.
