What is BS EN 62761 - Nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices about?
BS EN 62761 is an international standard used for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices. BS EN 62761 can be your best guide while performing the measurement method for these devices.
BS EN 62761 is the measurement method for nonlinear signals generated in the radio frequency (RF) surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices such as filters and duplexers, which are used in telecommunications, measuring equipment, radar systems and consumer products. BS EN 62761 includes basic properties of non-linearity, and guidelines to set up the measurement system and to establish the measurement procedure of nonlinear signals generated in SAW/BAW devices.
Note: It is not the aim of BS EN 62761 to explain a theory, nor to attempt to cover all the eventualities which may arise in practical circumstances. BS EN 62761 draws attention to some of the more fundamental questions, which the user has to consider before he/she places an order for an RF SAW/BAW device for a new application. Such a procedure will be the user's insurance against unsatisfactory performance.
Who is BS EN 62761 - Nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices for?
BS EN 62761 on Guidelines for the measurement method of nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices in radio frequency (RF) is useful for:
- Manufacturer of electronic devices
- Manufacturer of automotive parts
- Electronic devices
- Telecommunication industry
- Defence
- Aerospace
Why should you use BS EN 62761 - Nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices?
Surface acoustic waves are used for flow measurement. SAW relies on the propagation of a wavefront that is like seismic activities. Bulk Acoustic Wave (BAW) are compact, low-cost RF filters that can be used in a wide range of applications. These BAW devices are useful in converting electrical energy into acoustic or mechanical energy on a piezoelectric material.
BS EN 62761 is useful in determining the nonlinear properties of these surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices. BS EN 62761 specifies the measuring equipment, methods and procedure for nonlinearity for surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices. This help in assuring the DUT and setup are used appropriately while conducting these methods.
BS EN 62761 can be your best guide for measuring the nonlinear signals generated in the radio frequency (RF) in surface acoustic wave (SAW) and bulk acoustic wave (BAW) devices.
