What is BS EN 62810- Dielectric rods- Cylindrical cavity method about?
BS EN 62810 is a safety standard on the cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods.
BS EN 62810 relates to a measurement method for complex permittivity of a dielectric rod at microwave frequency. The method described in BS EN 62810 has been developed to evaluate the dielectric properties of low-loss materials in coaxial cables and electronic devices used in microwave systems.
BS EN 62810 uses the TM010 mode in a circular cylindrical cavity and presents accurate measurement results of a dielectric rod sample, where the effect of sample insertion holes are considered accurately based on the rigorous electromagnetic analysis.
In comparison with the conventional method described in IEC 60556 [2]1, the method described in BS EN 62810 has the following characteristics:
- The values of the relative permittivity ε ' and loss tangent tan d of a dielectric rod sample can be measured accurately and non-destructively
- The measurement accuracy is within 1,0 % for ε ' and within 20 % for tan d
- The effect of sample insertion holes is corrected using correction charts presented
Note: The method described in BS EN 62810 is applicable for the measurements on the following condition:
- Frequency: 1 GHz ≦f ≦10 GHz
- Relative permittivity: 1 ≦ε ' ≦100
- Loss tangent: 10–4 ≦tan d ≦10–1
Who is BS EN 62810- Dielectric rods- Cylindrical cavity method for?
BS EN 62810 on the cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods is relevant to:
- Manufacturers of dielectric rods
- Manufacturers of measurement apparatus
- Testing authorities
- Electricians
- Electrical engineers
- Electromagnetic engineers
Why should you use BS EN 62810- Dielectric rods- Cylindrical cavity method?
Dielectric rod antennas provide significant performance advantages.
BS EN 62810 shows a schematic diagram of two equipment systems required for microwave measurement. The structure of the TM010 mode cylindrical cavity resonator used in the complex permittivity measurement is also shown in BS EN 62810.
Overall, BS EN 62810 is useful as it assists with the cylindrical cavity method to measure the complex permittivity of low-loss dielectric rods which can be beneficial for your business.
