BS EN 751-3:1997

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water. Unsintered PTFE tapes | Status: Superseded, Withdrawn

1 Scope This European Standard specifies requirements and test methods for unsintered polytetrafluorethylene (PTFE) tapes (hereafter referred to as PTFE tapes) which are suitable for sealing threaded metallic joints as specified in ISO 7‑1. The PTFE tapes are typically for use in installations for 1st family gases (town gas), 2nd family gases (natural gas) and 3rd family gases (liquefied petroleum gases (LPG)) up to 5 bar and up to 7 bar for hot water of heating systems (Class A) as well as up to 0,2 bar in gas appliances and their auxiliary equipment (Class B). The maximum working pressure covered in this European Standard is 20 bar which is relevant to LPG storage (Class C). The temperature range is limited to -20 ÊC to 125 ÊC.

NOTE. For applications outside the scope of this standard (e.g. compressed gases) the purchaser should consult the manufacturer.

Anaerobic jointing compounds are covered by EN 751‑1, non-hardening sealing materials in the form of, e.g. jointing compound paste, are covered by EN 751‑2.