BS EN 876:1995 Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints
BS EN 876 specifies the sizes of test specimens and the test procedure for carrying out longitudinal tensile tests on cylindrical test specimens in order to determine the mechanical properties of weld metal in a fusion welded joint.
BS EN 876 applies to metallic materials in all forms of product with joints made by any fusion welding process, having joint sizes that are sufficient to obtain cylindrical test specimens with dimensions in accordance with BS EN 10002-1.
Unless otherwise specified for specific points in this standard, the general principles of BS EN 10002-1 shall apply.
Contents of BS EN 876:
Foreword 2
1 Scope 3
2 Normative reference 3
3 Principle 3
4 Denominations and symbols 3
5 Removal of test specimens 3
5.1 Removal 3
5.2 Marking 3
5.3 Heat treatment and/or ageing 3
5.4 Extraction 3
6 Machining of test specimens 4
6.1 Location 4
6.2 Dimensions 4
6.3 Surface quality 4
7 Conditions of testing 4
8 Test results 5
8.1 General 5
8.2 Examination of fracture surfaces 5
9 Test report 5
Annex A (informative) Test report 6
Figure 1 — Examples of location of test specimens — longitudinal plane section 3
Figure 2 — Examples of location of test specimens — Cross section 4
Table A.1 — Longitudinal tensile test in accordance with EN 876 6
