What is BS EN IEC 60512‑99‑002 - Endurance test schedules for connectors about?
BS EN IEC 60512‑99‑002 is a part of an international standard that covers connectors for electrical and electronic equipment.
BS EN IEC 60512‑99‑002 specifies the test methods and test procedures for endurance test schedules for connectors. This helps in withstanding these tests conducted on the connectors.
BS EN IEC 60512‑99‑002 gives technical specifications such as related terms and definitions, general information, preparation of specimens, test circuit requirements, test methods, tests, and test schedule – test group UEL 1, etc.
BS EN IEC 60512‑99‑002 is used for testing connectors within the scope of SC 48B that are used in twisted pair communication cabling with remote power, such as ISO/IEC 11801 Class D (or better), balanced cabling in support of IEEE Std 802.3bt™, (PoE Plus – Power over Ethernet Plus).
Who is BS EN IEC 60512‑99‑002 - Endurance test schedules for connectors for?
BS EN IEC 60512‑99‑002 on Connectors for electrical and electronic equipment is applicable to:
- Manufacturer of electronic devices
- Manufacturer of electrical circuits
- Manufacturer of automotive parts
- Electronic engineer
Why should you use BS EN IEC 60512‑99‑002 - Endurance test schedules for connectors?
Connectors are electromechanical components used for joining electronic conductors. These connectors are useful in creating electrical circuits. An application-specific current and the associated open-circuit voltage are specified, that correspond with the current and voltage of the supported application.
The object of BS EN IEC 60512‑99‑002 is to detail a test schedule to determine the ability of pairs of connectors to withstand a sequence of tests with a total of 100 engagements and separations. The electrical current is passed through the connectors during the separation (unmating) step only, in accordance with IEC 60512-9-3.
BS EN IEC 60512‑99‑002 specifies test methods and test requirements for conducting the endurance tests of connectors. This test helps the users in verifying the separation of connectors under PoE plus loading conditions.
By using BS EN IEC 60512‑99‑002 you can determine the ability to withstand the test with a total of 100 engagements and separations in conductors. This helps in manufacturing good quality connectors which are used in electronic devices.
