What is BS EN IEC 61158-5-19 - FAL type 19 application layer protocol about?
The Fieldbus application layer (FAL) provides user programs with a means to access the Fieldbus communication environment. In this respect, the FAL can be viewed as a “window between corresponding application programs.”
BS EN IEC 61158-5-19 provides common elements for basic time-critical and non-time-critical messaging communications between application programs in an automation environment and material specific to Type 19 Fieldbus. The term “time-critical” is used to represent the presence of a time window, within which one or more specified actions are required to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant, and possibly human life.
BS EN IEC 61158-5-19 defines in an abstract way the externally visible service provided by the Fieldbus application layer in terms of:
- An abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service
- The primitive actions and events of the service
- The parameters associated with each primitive action and event and the form in which they take
- The interrelationship between these actions and events, and their valid sequences.
BS EN IEC 61158-5-19 defines the services provided to:
- The FAL user at the boundary between the user and the application layer of the Fieldbus reference model
- Systems Management at the boundary between the application layer and Systems Management of the Fieldbus reference model
BS EN IEC 61158-5-19 specifies the structure and services of the Fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545).
Note: BS EN IEC 61158-5-19 is not a formal programming interface, and any such interface will need to address implementation issues not covered by this specification, including
- The sizes and octet ordering of various multi-octet service parameters
- The correlation of paired request and confirm, or indication and response, primitives
Who is BS EN IEC 61158-5-19 - FAL type 19 application layer protocol for?
BS EN IEC 61158-5-19 on FAL type 19 application layer protocol is useful for:
- Internet service providers
- Telecommunication companies
- The IT industry / Software programmers
- Internet engineering task forces
- The automation industry
- Networking sectors
- Implementors and designers of industrial automation systems
Why should you use BS EN IEC 61158-5-19 - FAL type 19 application layer protocol?
BS EN IEC 61158-5-19 is produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the “three-layer” Fieldbus reference model described in IEC 61158-1. The application service is provided by the application protocol making use of the services available from the data link or other immediately lower layer. BS EN IEC 61158-5-19 defines the application service characteristics that Fieldbus applications and/or system management may exploit.
BS EN IEC 61158-5-19 provides migration paths from previously-existing industrial communications protocols. It is this latter objective that gives rise to the diversity of services standardized as the various Types of IEC 61158, and the corresponding protocols standardized in subparts of IEC 61158-6.
BS EN IEC 61158-5-19 is used as the basis for formal application programming interfaces. Using BS EN IEC 61158-5-19 guidelines, you facilitate the creation of systems that increase the work efficiency for your customers.
What’s changed since the last update?
BS EN IEC 61158-5-19:2019 is the fourth edition that supersedes EN IEC 61158-5-19:2019, which will be withdrawn on 15 May 2022 and is identical to BS EN IEC 61158-5-19:2019. The technical changes as compared to the third edition published in 2014 are:
- improving the hotplug and redundancy features;
- improving the phase switching and the error handling;
- editorial improvements.
