What is BS EN IEC 61169‑61 about?
BS EN IEC 61169 is a series on radio-frequency connectors. BS EN IEC 61169‑61 which is a sectional specification (SS), provides information and rules for the preparation of detailed specifications (DS). BS EN IEC 61169‑61 specifies coaxial connectors with a 9,5 mm inner diameter of the outer conductor and quick-lock coupling mechanism, characteristic impedance 50 Ω and an operating frequency of up to 8,5 GHz.
BS EN IEC 61169‑61 specifies mating face dimensions for general purpose connectors – grade 2, dimensional details of standard test connectors – grade 0, gauge information and test requirements, product ratings and characteristics.
BS EN IEC 61169‑61 specifies the outline dimensions of connectors and protective sleeves, which could bring interchangeability between pairs of connectors and protective sleeves from different manufacturers.
BS EN IEC 61169‑61 indicates the recommended performance characteristics to be considered when writing a detailed specification and covers test schedules and inspection requirements for assessment levels M and H.
Who is BS EN IEC 61169‑61 for?
BS EN IEC 61169‑61 on radio-frequency connectors is useful for:
- Radio device and component manufacturers
- Telecommunication companies
- Design engineers
- Cable manufacturers and distributors
Why should you use BS EN IEC 61169‑61?
A coaxial RF connector is an electrical connector designed to work at radio frequencies in the multi megahertz range. BS EN IEC 61169‑61 provides information on RF coaxial connectors with 9,5 mm the inner diameter of the outer conductor, quick-lock coupling of connectors and series Q4.1-9.5 connectors.
BS EN IEC 61169‑61 discusses Q4.1-9.5 connectors which have socket centre contacts and are compatible with threaded 4,1-9,5 series connectors with pin centre contact. This type of connector is starting to be applied in telecommunication systems due to their special features which are suitable for outdoor harsh requirements, such as quick and reliable coupling, compatible with threaded connectors and being entirely waterproof.
BS EN IEC 61169‑61 also mentions a locking method for connectors known as quick-lock coupling. Quick-lock coupling is mechanically like a Snap-On coupling but features an additional self-locking component. The test schedules and inspection requirements for radio-frequency connectors mentioned in BS EN IEC 61169‑61 help you to establish a transmission line that will work in the multi megahertz range.
