BS EN IEC 61788-23:2024

Superconductivity. Residual resistance ratio measurement. Residual resistance ratio of cavity-grade Nb superconductors | Status: Current

1 Scope This part of IEC 61788 addresses a test method for the determination of the residual resistance ratio (RRR), rRRR, of cavity-grade niobium. This method is intended for high-purity niobium grades with 150 < rRRR < 600. The test method is valid for specimens with rectangular or round cross-section, cross-sectional area greater than 1 mm2 but less than 20 mm2, and a length not less than 10 nor more than 25 times the width or diameter.