BS EN IEC 62282-8-201:2024 - Page 2

Fuel cell technologies. Energy storage systems using fuel cell modules in reverse mode. Test procedures for the performance of power-to-power systems | Status: Current

1 Scope This part of IEC 62282 defines the evaluation methods of typical performances for electric energy storage systems using hydrogen. It is applicable to the systems that use electrochemical reaction devices for both power charge and discharge. This document applies to systems that are designed and used for service and operation in stationary locations (indoor and outdoor). The conceptual configurations of the electric energy storage systems using hydrogen are shown in Figure 1 and Figure 2. Figure 1 shows the system independently equipped with an electrolyser module and a fuel cell module. Figure 2 shows the system equipped with a reversible cell module. Indispensable components are an electrolyser module and a fuel cell module, or a reversible cell module, an overall management system (which includes a data interface and can include a pressure management), a thermal management system (which can include a thermal storage), a water management system (which can include a water storage) and a purge gas supply (inert gas, practically neither oxidizing nor reducing).

NOTE 1 Indispensable components are indicated by bold lines in Figure 1 and Figure 2.

The system can be equipped with either a hydrogen storage or a connection to an external hydrogen supply infrastructure or a combination of both. There can be a battery and an oxygen storage, as optional components. The electrolyser module can comprise one or more electrolysers whether or not of the same type. Depending on the operating conditions and considering the operation history, the overall management system can command the concurrent operation of the electrolysers. The fuel cell module can comprise one or more fuel cells whether or not of the same type. Depending on the operating conditions and considering the operation history, the overall management system can command concurrent operation of the fuel cells. The reversible cell module can comprise one or more reversible cells whether or not of the same type. The fuel cell module can comprise one or more fuel cells whether or not of the same type. Depending on the operating conditions and considering the operation history, the overall management system can command concurrent operation of the reversible cells. The performance measurement is executed in the defined area surrounded by the bold outside solid line (system boundary).

NOTE 2 In the context of this document, the term "reversible" does not refer to the thermodynamic meaning of an ideal process. It is common practice in the fuel cell community to call the operation mode of a cell that alternates between fuel cell mode and electrolysis mode "reversible".

This document is intended to be used for data exchanges in commercial transactions between the system manufacturer and customer. Users of this document can selectively execute test items suitable for their purposes from those specified in this document. Figure 1 — System configuration of electric energy storage system using hydrogen - Type with electrolyser and fuel cell

NOTE 1 Overall management system, thermal management system, water management system and purge gas supply can have the relation with electrolyser, fuel cell, battery, hydrogen storage and oxygen storage, and also can have the relation with one another.

NOTE 2 Other fluid or energy in- or outputs, depending on the used electrolyser and fuel cell types, can be considered.

NOTE 3 The electricity input and output can be DC or AC or both. Power conditioning sub-systems are usually used.

NOTE 4 There can be more than one electricity point of connection for input or output or both.

EMD electromagnetic disturbance EMI electromagnetic interference Figure 2 — System configuration of electric energy storage system using hydrogen - Type with reversible cell

NOTE 1 Overall management system, thermal management system, water management system and purge gas supply can have the relation with reversible cell, battery, hydrogen storage and oxygen storage, and also can have the relation with one another.

NOTE 2 Other fluid or energy in- or outputs, depending on the used electrolyser and fuel cell types, can be considered.

NOTE 3 The electricity input and output can be DC or AC or both. Power conditioning sub-systems are usually used.

NOTE 4 There can be more than one electricity point of connection for input or output or both.

EMD electromagnetic disturbance EMI electromagnetic interference