What is BS EN IEC 62386-333 – Digital addressable lighting about?
BS EN IEC 62386-333 is a European standard that discusses the particular requirements for control gear of manual configuration.
BS EN IEC 62386-333 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347 (all parts).
BS EN IEC 62386-333 is applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1 control devices supporting manual configuration.
Note: BS EN IEC 62386-333 does not include Requirements for testing individual products during production.
Who is BS EN IEC 62386-333 – Digital addressable lighting for?
BS EN IEC 62386-333 on Control gear of manual configuration applies to:
- Manufacturer of electronic control gear
- Quality testing personnel
- Electronic engineer
Why should you use BS EN IEC 62386-333– Digital addressable lighting?
Digital Addressable Lighting Interface is a dedicated protocol for digital lighting control that enables the easy installation of robust, scalable and flexible lighting networks. Manual configuration is a configuration of instance variables and/or control device variables and/or feature variables using other means than the bus.
BS EN IEC 62386-333 provides you with an Insulation method that controls a device that has at least supplementary insulation. However, this also depends on the connected components (means) for manual configuration. In case internal components are used, the control device has at least supplementary insulation. In the case of externally connected components, it depends on the requirements imposed on these components.
BS EN IEC 62386-333 guides you regarding the standardization of the control interface for control gear which is intended to achieve compatible co-existence between electronic control gear and lighting control devices, below the level of building management systems. BS EN IEC 62386-333 describes a method of implementing control gear.
BS EN IEC 62386-333 provides you with comprehensive information useful for control the gear of control devices. With obedience and compliance to BS EN IEC 62386-333, you can achieve precision in terms of product functionality.
