NOTE 1 The term "Automation Solution" is used as a proper noun (and therefore capitalized) in this document to prevent confusion with other uses of this term.
Collectively, the security processes offered by an IACSservice provider are referred to as its Security Program (SP) for IACSasset owners. In a related specification, IEC 62443‑2‑1 describes requirements for the Security Management System of the asset owner.NOTE 2 In general, these security capabilities are policy, procedure, practice and personnel related.
Figure 1 illustrates the integration and maintenance security processes of the asset owner, service provider(s), and product supplier(s) of an IACS and their relationships to each other and to the Automation Solution. Some of the requirements of this document relating to the safety program are associated with security requirements described in IEC 62443‑3‑3 and IEC 62443‑4‑2.NOTE 3 The IACS is a combination of the Automation Solution and the organizational measures necessary for its design, deployment, operation, and maintenance.
NOTE 4 Maintenance of legacy system with insufficient security technical capabilities, implementation of policies, processes and procedures can be addressed through risk mitigation.
Figure 1 — Scope of service provider processes In Figure 1, the Automation Solution is illustrated to contain essential functions that include safety functions, commonly implemented by a Safety Instrumented System (SIS), and complementary and control functions, commonly implemented by supporting applications, such as batch management, advanced control, historian, and security related applications. The dashed boxes identify organizational roles that perform the indicated actions.NOTE 5 Automation Solutions typically have a single control system (product), but they are not restricted to do so. In general, the Automation Solution is the set of hardware and software, independent of product packaging, which is used to control a physical process (e.g. continuous or manufacturing) as defined by the asset owner.
NOTE 6 Service providers often provide generic architectures that can be adapted for integration into an Automation Solution. These generic architectures are often referred to as "reference architectures".
