This part of IEC 62626 applies to enclosed switches-disconnectors with rated voltages up to 1 000 V AC for repair and maintenance work or cleaning work in load circuits. Devices within the scope of this document are switch-disconnectors in accordance with IEC 60947‑3 with specific additional requirements. Enclosed switch-disconnectors in this document are suitable for isolation in accordance with the IEC 60947 series and are not equipped with means for remote control or automatic switching to avoid unexpected or accidental start. These devices are not used for operational switching, for example quick start and stop, jogging.
NOTE 1 However, this kind of devices can provide the possibility to switch off electrical equipment (even in a critical situation or not).
Devices within the scope of this document provide isolation of electrical equipment, especially in motor circuits, during repair and maintenance or cleaning works.
Enclosed switch-disconnectors for various applications to provide isolation of electrical equipment during repair and maintenance work, named “maintenance switches”, are designated hereafter as devices with:
-
different classes;
-
characteristics of each class;
-
minimum test requirements;
-
information to be marked on the equipment or made available by the manufacturer, for example in the catalogue.
NOTE 2 This document does not specify additional requirements that are necessary for the application of these switches, for example, in explosive atmospheres (e.g. ATEX in Europe).
