BS EN ISO 10582:2012

This International Standard specifies the characteristics of non-cushioned, heterogeneous floor coverings, based on poly vinyl chloride (PVC), supplied in either tile or roll form.

BS EN ISO 10582 encourage the consumer to make an informed choice, this International Standard includes a classification system (see ISO 10874) based on the intensity of use, which shows where these floor coverings give satisfactory service.

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

• ISO 105-B02:1994, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test
• ISO 105-B02:1994, Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. Amendment 1:1998
• ISO/TR 4918, Textile floor coverings — Determination of wear — Castor chair test
• ISO 10874, Resilient, textile and laminate floor coverings — Classification
• ISO 23996, Resilient floor coverings — Determination of density
• ISO 23997, Resilient floor coverings — Determination of mass per unit area
• ISO 23999, Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
• ISO 24340, Resilient floor coverings — Determination of thickness of layers
• ISO 24341, Resilient and textile floor coverings — Determination of length, width and straightness of sheet
• ISO 24342, Resilient and textile floor-coverings — Determination of side length, edge straightness and squareness of tiles
• ISO 24343-1, Resilient and laminate floor coverings — Determination of indentation and residual indentation —Part 1: Residual indentation
• ISO 24344:2008, Resilient floor coverings — Determination of flexibility and deflection
• ISO 24346, Resilient floor coverings — Determination of overall thickness

1. Scope
2. Normative references
3. Terms and definitions
4. Requirements
5. Classification
6. Marking, labelling and packaging
7. Annex A
8. Bibliography