BS EN ISO 10714:2002

Steel and iron. Determination of phosphorus content. Phosphovanadomolybdate spectrophotometric method. | Status: Superseded, Withdrawn

1 Scope This International Standard specifies a spectrophotometric method for the determination of phosphorus in steel and iron with the following limitations. The method is applicable to phosphorus contents between 0,001 0 % (m/m) and 1,0 % (m/m). Arsenic, hafnium, niobium, tantalum, titanium, and tungsten interfere in determining phosphorus, but the interferences tan be partially overcome by formation of complexes and use of small quantities of test portion. Depending on the concentration of the interfering elements, the application ranges and test portions given in table 1 apply. The lower end of the application range tan only be reached in test samples with low contents of the interfering elements. Table 1 — Maximum content of the interfering elements, % (m/m) Test portion Application range, ∆Wp As Hf Nb Ta Ti W g % (m/m) 0,05 0,1 1 0,1 2 2 1,0 0,001 to 0,010 0,2 0,5 5 0,5 10 8 0,25 0,005 to 0,040 0,5 1,5 10 1,0 25 25 0,10 0,010 to 0,100 0,2 0,5 5 0,5 10 8 0,25 0,100 to l,00