This standard defines the general requirements for safe access to machines and gives advice about the correct choice of access.
This part applies to all machinery (stationary and mobile) where fixed means of access are necessary, and to working platforms and walkways which are a part of a machine.
It may also apply to working platforms and walkways to a part of the building where the machine is installed, providing the main function of that part of the building is to give a means of access to the machine.
This part also applies to working platforms and walkways specific to the machine which are not permanently fixed to the machine and which may be removed or moved to the side for some operations of the machine (e.g. changing tools in a large press).
BS EN ISO 14122 consists of the following parts, under the general title "Safety of machinery - Permanent means of access to machinery" :
- Part 1: Choice of a fixed means of access between two levels
- Part 2: Working platforms and walkways
- Part 3: Stairs, stepladders and guard-rails
- Part 4: Fixed ladders
Contents of BS EN ISO 14122-2:
- Foreword
- Introduction
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 General requirements
- 4.1 General
- 4.1.1 Construction and materials
- 4.1.2 Safety of operators
- 4.2 Specific requirements
- 4.2.1 Location
- 4.2.2 Dimensions
- 4.2.3 Facilities or equipment
- 4.2.4 Floorings
- 4.2.5 Design loads
- 5 Assembly instructions
- Annex A (informative) Different methods of determining levels of slip-resistance
- Annex ZA (informative) Relationship of this European standard with EC Directives
- Bibliography
