BS EN ISO 14922-4:1999

Thermal spraying. Quality requirements of thermally sprayed structures. Elementary quality requirements | Status: Superseded, Withdrawn

1 Scope This standard specifies requirements so that:

• — It is independent of the type of the thermally sprayed structure.
• — It defines quality requirements for thermal spraying both in workshops and on site.
• — It provides guidance for describing a manufacturer's capability to produce thermally sprayed constructions to meet specified requirements.
• — It may also be used as a basis for assessing the manufacturer in respect to his thermal spraying capability.

This standard is appropriate when demonstration of a manufacturer's capability to produce thermally sprayed construction, fulfilling specified quality requirements, are specified in one or more of the following:

• — a contract between involved parties;
• — an application standard;
• — a regulatory requirement.

The requirements contained within this standard may be adopted in full or may be selectively deleted by the manufacturer if not applicable to the construction concerned. They provide a flexible framework for the control of thermal spraying in the following cases:

• — Case 1 To provide specific requirements for thermal spraying in contracts which require the manufacturer to have a quality system other than EN ISO 9001 or EN ISO 9002.
• — Case 2 To provide specific requirements for thermal spraying in contracts which require the manufacturer developing a quality system.
• — Case 3 To provide specific requirements for thermal spraying in application standards which uses thermal spraying as part of its requirements or in a contract between relevant parties.