BS EN ISO 15614-7 specifies how a preliminary welding procedure specification for overlay welding is qualified by welding procedure tests.
Part 7 of BS EN ISO 15614 defines the conditions for carrying out welding procedure tests and the range of qualification for welding procedures for all practical welding operations within the range of variables listed. Additional tests may be required by applicable standards.
BS EN ISO 15614 applies to all welding processes suitable for overlay welding. The standard is applicable to all new welding procedures. However, it does not invalidate previous welding procedure tests made to former national standards or specifications. Where additional tests are carried out to make the qualification technically equivalent, they are only done on a test piece made in accordance with this part of BS EN ISO 15614.
BS EN ISO 15614 does not apply to overlay welding where cracks are intentionally produced (e.g. special hardfacing applications).
Part 7 of BS EN ISO 15614 is part of a series of standards. Details of this series are given in BS EN ISO 15607:2003.
Previous procedure qualifications to former national standards or specifications should be taken into consideration at the time of the enquiry or contract stage and agreed between the contracting parties.
