BS EN ISO 19399:2017 - Page 2

Paints and varnishes. Wedge-cut method for determination of film thickness (scribe and drill method). | Status: Under review, Current

1 Scope This International Standard specifies a destructive method for determination of the dry film thickness, in which damage to the coat caused in a definite manner is evaluated microscopically. The method is suitable for almost all coat-substrate combinations and also allows determination of the single film thicknesses of coating systems. The method cannot be applied or can only be applied with restrictions in case of

• — too soft and/or elastic coatings (no recognizable scribe or drill hole can be observed),
• — hard (cannot be scribed/drilled) or too soft and/or elastic substrates,
• — too low visual contrast between the coating and substrate, and
• — film thicknesses that are larger than the depth of field of the measuring microscope.