What is ISO 19432-1 about?
ISO 19432 discusses portable, hand-held, internal combustion engine-driven construction machinery and equipment.
ISO 19432-1 is a type-C standard as stated in ISO 12100.
ISO 19432-1 is the first part of the series that specifies safety requirements and measures for their verification for the design and construction of portable hand-held internal combustion engine-driven cut-off machines that are intended to be used by a single operator in the cutting of construction materials.
ISO 19432-1 deals with all the significant hazards and hazardous situations that are relevant to cutting machinery when they are used as intended and under the conditions foreseen by the manufacturer.
ISO 19432-1 also specifies methods for the elimination or reduction of hazards that are arising from their use and specific information on safe working practices to be provided by the manufacturer.
ISO 19432-1 applies only to those machines that are designed purposely for use with a rotating, bonded- abrasive, and super-abrasive cut-off wheel that have a maximum outer diameter of 430 mm, center-mounted on and driven by a spindle shaft where the top of the wheel rotates away from the operator.
Note 1: Under ISO 19432-1 portable, hand-held, internal combustion engine-driven cut-off machines are called “cut-off machines”.
Note 2: Under ISO 19432-1 cut-off wheel specifications are not covered.
Note 3: ISO 19432-1 does not apply to machines that are manufactured before the date of its publication.
Who is ISO 19432-1 for?
ISO 19432-1 on the cut-off machine is relevant to:
Stakeholder groups representing the market players with regard to machinery safety:
- Machine manufacturers (small, medium, and large enterprises)
- Health and safety bodies (regulators, market surveillance, etc.)
Others can be affected by the level of machinery safety achieved:
- Machine employers (small, medium, and large enterprises)
- Machine employees
- Service providers, e. g. for maintenance (small, medium, and large enterprises)
Why should you use ISO 19432-1?
Type C standards are those standards that take precedence over the provisions of other standards for machines that are designed and built according to provisions of the type C standard.
ISO 19432-1 is a type C standard that applies to cut-off machines that are intended to be used by a single operator in the cutting of construction materials.
Requirements mentioned under ISO 19432-1 assist in preventing significant hazards and hazardous situations during the construction of cutting machinery.
ISO 19432-1 guides against the residual risks that are involved in the construction of cutting machinery and thus, warns against risks involved in the construction.
ISO 19432-1 assist in evaluating and maintaining cutting machines in your processing plants to increase the efficiency of the work.
Enhance the efficiency and safety of cuff-off machinery by adapting all the safety measurements to prevent any residual risks that are involved.
What’s changed since the last update?
BS EN ISO 19432-1:2020 supersedes BS EN ISO 19432:2012 which is withdrawn.
The main changes are:
- Update of normative references and figures
- Update/revision of terms and definitions
- Revision regarding requirements for fuel tanks, oil tanks, and fuel lines
- Revision of requirements for labels and handles
