BS EN ISO 19472-2:2022

Machinery for forestry. Winches. Traction aid winches | Status: Current

1 Scope This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking). This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aidwinch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aidwinch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E). Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011. This document is not applicable to traction aid winches manufactured before the date of its publication.