BS EN ISO 4254-6:2009 Agricultural machinery. Safety. Sprayers and liquid fertilizer distributors
BS EN ISO 4254-6, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with pesticide products and liquid fertilizer application, designed for use by one operator only.
In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
This part of ISO 4254 is not applicable to:
- Pedestrian-controlled sprayers
- Knapsack sprayers
- Aerial sprayers
- Handheld spraying devices (e.g. spray guns).
BS EN ISO 4254-6, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to sprayers and liquid fertilizer distributors when they are used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from:
- Automatically actuated height adjustment systems
- Electrostatic phenomena
- Electromagnetic compatibility
- The environment, other than noise
Inhalation of spraying chemical products due to a lack of effective methods to maintain breathing air quality inside the cab
- Rroll-over and tip-over of self-propelled machines with a ride-on driver
- Vibration (except the declaration)
- Dust emission
- Burns
- Moving parts for power transmission except strength requirements for guards and barriers
- Safety and reliability of control systems
- Travelling function of self-propelled machines.
BS EN ISO 4254-6 is not applicable to sprayers and liquid fertilizer distributors which are manufactured before the date of publication of this document by ISO.
Contents of BS EN ISO 4254-6:
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
5.1 General
5.2 Stability
5.3 Spray booms
5.4 Spray tank
5.5 Pressure indicator (manometer)
5.6 Protection against overpressure
5.7 Fan
5.8 Spray liquid carrying hoses
5.9 Manual spraying stop control
5.10 Clean water tank
5.11 Hitching and clearance zone
5.12 Servicing and maintenance
5.13 Noise reduction at the design stage
6 Verification of the safety requirements and/or protective measures
7 Information for use
7.1 Instruction handbook
7.2 Marking
Bibliography
