What is ISO 4267-2 - Terms employed in the calculation of metered petroleum quantities about?
ISO 4267-2 defines the various terms (be they words or symbols) employed in the calculation of metered petroleum quantities. Where two or more terms are customarily employed in the oil industry for the same quantity, a preferred term is selected.
ISO 4267-2 also specifies the equations which allow the values of correction factors to be computed. It also gives rules for the sequence, rounding and significant figures to be employed in a calculation. It provides tables that may be used to look up specific correction factors should it not be desired to calculate them by manual as well as computer methods. The calculation of prover base volumes, meter factors and measurement tickets is also covered.
The field of application of ISO 4267-2 is the volumetric measurement of liquid hydrocarbons, including liquefied petroleum gases, by meter and prover.
Note: ISO 4267-2 does not include two-phase fluids (though it may be found useful in such situations) except in so far as sediment and water may be mixed in with crude oil.
Who is ISO 4267-2 - Terms employed in the calculation of metered petroleum quantities for?
ISO 4267-2 on terms employed in the calculation of metered petroleum quantities is useful for:
- Petroleum industry
- Research institutes and academia
- Agencies involved in the calculation of metered petroleum quantities
- Bodies handling computing systems
Why should you use ISO 4267-2 - Terms employed in the calculation of metered petroleum quantities?
Before the compilation of this publication, words and expressions employed in dynamic measurement calculations were interpreted slightly differently by different people, and there was a lack of coherence in their use. In addition, because data were spread over so many standards, there was difficulty in readily comparing the finer points of calculations.
Rules for rounding, and the choice of how many significant figures entered each calculation, were open to a variety of interpretations. For different operators to obtain identical results from the same data, the rules for sequence, rounding and significant figures have to be defined.
ISO 4267-2 aims, among other things, at defining the minimum set of rules required. Nothing in ISO 4267-2 precludes the use of more precise determinations of temperature, pressure and density or the use of more significant digits, by mutual agreement among the parties involved.
ISO 4267-2 aims at consolidating and standardizing calculations pertaining to the metering of petroleum liquids, and at clarifying terms and expressions by eliminating local variations of such terms. The purpose of standardizing calculations is to produce the same answer from the same data regardless of the computing system used.
Although ISO/TC 28 standards use 15 °C as a standard reference temperature, it is recognized that individual countries may use other reference temperatures, for example 20 °C, 12 °C or 60 °F.
ISO 4267-2 sets minimum levels of accuracy for industrial calculations, but, if parties consider agreeing to set tighter requirements, it is important to demonstrate whether such requirements can be met. Future technological progress in meter proving and operation may justify a tighter specification for calculation procedures.
